由于飛機機械模型材料的細節，維修飛機機械模型配件和檢查是必不可少的，針對造成的損壞，修復損壞的部件，檢查氣動噴射器的所有部件是否泄漏和具體措施用例。

Due to the details of aircraft mechanical model materials, it is essential to repair aircraft mechanical model accessories and check. For the damage caused, repair the damaged parts, and check whether all parts of the pneumatic ejector leak and specific measures.

水貼紙的力學模型是脆弱的很容易干燥，因此模型在很長時間的地方將不得不解除水貼紙包裝食品保鮮膜長時間存儲。把它在冰箱等用于可以取出來。如果破解了水貼紙，你可以使用模型油漆稀釋噴淋水貼紙，反復噴灑不止一次可以被修復。

The mechanical model of water stickers is fragile and easy to dry, so the model will have to be removed from the water stickers for a long time, and the food preservation film will be stored for a long time. Put it in the refrigerator, etc. it can be taken out. If you crack the water sticker, you can use the model paint to dilute and spray the water sticker, which can be repaired by spraying repeatedly more than once.

對于受損氣管的更換，飛機機械模型關注跟蹤檢測的幾個重要部位：頂部凸出的引入，而對面件的作用是保證模型的開合活動和頂部的塑料部件突出。

For the replacement of the damaged air pipe, the aircraft mechanical model focuses on several important parts of the tracking and detection: the introduction of the top bulge, and the function of the opposite part is to ensure the opening and closing activities of the model and the protrusion of the plastic parts on the top.

零件損壞和粘連會導致停機，因此應經常保留模型頂針和潤滑導柱，并定期檢查頂針和導柱是否變形和表面損壞。一經發現，應及時更換。

Damage and adhesion of parts will lead to shutdown. Therefore, the ejector pin and lubricating guide post of the model should be kept frequently, and the ejector pin and guide post should be checked regularly for deformation and surface damage. Once found, it should be replaced in time.

生產周期完成后，大型飛機模型廠家提醒您特別注意工作面的抗拉強度的保護，運動，以及零件的涂層覆蓋，特別是上齒輪，軸承零件和彈簧飛機機械模型，確保其始終處于佳工作狀態。

After the production cycle is completed, the large aircraft model manufacturer reminds you to pay special attention to the protection and movement of the tensile strength of the working surface, as well as the coating coverage of parts, especially the upper gear, bearing parts and spring aircraft mechanical model, to ensure that it is always in good working condition.

隨著生產時間的推移，冷卻路容易沉積水垢和鐵銹、泥漿和一種藻類，使冷卻流道的橫截面變量變小冷卻通道變窄，大大降低了冷卻液和模型直間的熱交換率，增加了企業的生產成本。因此，應注意流道的清潔，對于熱回路的飛機機械模型，加熱和控制系統的維護以防止故障的發生尤為重要。

With the passage of production time, the cooling path is easy to deposit scale and rust, mud and a kind of algae, which reduces the cross-sectional variable of the cooling channel and narrows the cooling channel, greatly reduces the heat exchange rate between the coolant and the model, and increases the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the flow channel. For the aircraft mechanical model of the thermal circuit, the maintenance of the heating and control system is particularly important to prevent failures.

飛機模型保養時這幾個重要零部件必要檢測內容就是這樣了，您如果有其他的想法或者需求，關注我們網站http://fustercnc.com聯系我們，為您提供平臺。

This is the necessary testing content of these important parts during aircraft model maintenance. If you have other ideas or needs, please follow our website http://fustercnc.com Contact us to provide you with a platform.