機器人模型制作完成后，機器人模型制作公司會根據客戶指定的位置進行模型的運輸和安裝。如果機器人公司把模型放錯位置會怎么樣？你對這個問題了解多少？今天，
大型機器人模型制作廠家將為大家介紹這個問題，希望對大家有所幫助。
After the robot model is made, the robot model making company will transport and install the model according to the location designated by the customer. What happens if the robot company misplaces the model? How much do you know about this problem? Today, the large-scale robot model manufacturer will introduce this problem to you, hoping to help you.
只有控制溫度和濕度，仿真模型的使用壽命才會延長。制作機器人模型需要的很多材料都不能長時間暴露。如果使用不當，將會造成不可估量的損失。以下信息是我們企業客戶近年來對沙盤公司的反饋，供我們參考，避免企業出現同樣的問題和不必要的損失。
Only by controlling the temperature and humidity can the service life of the simulation model be prolonged. Many materials needed to make robot models cannot be exposed for a long time. If used improperly, it will cause immeasurable losses. The following information is the feedback of our corporate customers to the sand table company in recent years, for our reference, to avoid the same problems and unnecessary losses.
其一，機器人模型建筑和植被嚴重變形。問題的原因是沒有采用‘合理避光’。二是機器人模型底座剝落，顏色暗淡。問題的原因是沒有采用‘合理防水’的布置。
First, the robot model buildings and vegetation are seriously deformed. The reason for the problem is that "reasonable light protection" is not adopted. Second, the base of the robot model is peeling off and the color is dim. The reason for the problem is that 'reasonable waterproof' arrangement is not adopted.
三是機器人模型燈光頻繁閃爍，小燈不亮。產生這一問題的原因是沒有對電壓進行合理的控制，造成局部電壓不穩定，局部線路短路。
Third, the lights of the robot model flicker frequently and the small lights are not bright. The reason for this problem is that the voltage is not reasonably controlled, resulting in local voltage instability and local line short circuit.
此外，制作機器人模型時，企業先要向機器人模型制造公司介紹擺放位置，確定是否能夠合理擺放沙盤模型。機器人模型公司會根據企業的實際情況，向客戶推薦幾種機器人模型的擺放方式和方向。客戶在使用機器人模型時，可以更合理地增加機器人模型的使用壽命。
In addition, when making the robot model, the enterprise must first introduce the placement position to the robot model manufacturing company to determine whether the sand table model can be reasonably placed. The robot model company will recommend several placement methods and directions of robot models to customers according to the actual situation of the enterprise. When customers use the robot model, they can more reasonably increase the service life of the robot model.
What happens if the robot model is misplaced? The above is the answer to the question. If you have any information about this, please come to our website http://fustercnc.com Consultation and understanding.
