大型艦船模型是很精致的一種模型，一不小心就可能損壞了，那么艦船模型制作出來后怎么保養呢？小編淺談模型保養五關鍵。

The large-scale ship model is a very delicate model. It may be damaged if you are not careful. How can you maintain the ship model after it is made? Editor: talking about the five keys of model maintenance.

1，不能讓模型暴露在戶外，因為模型制造資料約束，如果是長時間讓模型暴露在戶外的話，很簡單形成模型變形，不僅如此，更能使得模型原料發生變化，到時候，模型也就報廢了。

1. The model cannot be exposed outdoors because of the constraints of the model manufacturing materials. If the model is exposed outdoors for a long time, it is very easy to form the model deformation. Not only that, but also the model raw materials can be changed. At that time, the model will be scrapped.

2，防止人為的損壞。處于各個方面的原因，在戶外不加以防護的話，很簡單形成模型遭到人為的損壞和維護。

2. Prevent artificial damage. For various reasons, if the model is not protected outdoors, it will be easily damaged and maintained by people.

3，適當?shù)倪\用資料繼續進行維護。這兒的資料和東西主要是讓那些模型不至于遭到危害的資料，不僅如此，還要時間堅持修建艦船模型的原貌，定期清理，而這些作業都需求的模型公司進行的.

3. Properly use the data to continue maintenance. The data and things here are mainly the data to prevent the models from being damaged. Moreover, it is necessary to persist in building the original appearance of the ship models and regularly clean them. These operations need to be carried out by professional model companies

4，艦船模型外殼上的氧化物定期清理，才能長期保存

4. The oxide on the shell of the ship model can be cleaned regularly for long-term storage

5，動態類模型運輸好的航空箱打包，模型底座表面的灰塵請勿用酒精之類的擦涂。

5. The dynamic model shall be transported in professional air boxes. The dust on the surface of the model base shall not be wiped with alcohol or the like.

此外對于相關的機械模型而言，氣管損壞進行更換，要對機械模型幾個重要零部件進行跟蹤檢測：

In addition, for the relevant mechanical model, the air pipe is damaged and replaced, and several important parts of the mechanical model shall be tracked and inspected:

介紹頂出、導向部件的作用是確保模型開合運動及塑件頂出，若機械模型其中任何部位因損傷而卡住，將導致停產，故應經常保持模型頂針、導柱的潤滑，并定期檢查頂針、導柱等是否發生變形及表面損傷，一經發現，要及時更換；

The function of ejector and guide parts is to ensure the opening and closing movement of the model and the ejection of the plastic parts. If any part of the mechanical model is stuck due to damage, it will lead to shutdown. Therefore, the lubrication of the ejector pin and guide column of the model should be maintained regularly, and the ejector pin and guide column should be regularly checked for deformation and surface damage. Once found, it should be replaced in time;

完成一個生產周期之后，要對機械模型工作表面、運動、導向部件涂覆的防銹油，尤應重視對帶有齒輪、齒條模型軸承部位和彈簧機械模型的彈力強度的保護，以確保其始終處于好的工作狀態。

After completing a production cycle, the working surface, movement and guide parts of the mechanical model shall be coated with professional anti rust oil, and special attention shall be paid to the protection of the elastic strength of the bearing parts of the gear and rack model and the spring mechanical model to ensure that it is always in a good working state.

隨著生產時間持續，冷卻道易沉積水垢、銹蝕、淤泥及水藻等，使冷卻流道截面變小，冷卻通道變窄，大大降低冷卻液與模型之間的熱交換率，增加企業生產成本，因此對流道的清理應引起重視。更多相關的內容就來我們網站http://fustercnc.com咨詢了解吧。

With the continuous production time, scale, rust, sludge and algae are easily deposited in the cooling channel, which makes the section of the cooling channel smaller and the cooling channel narrower, greatly reducing the heat exchange rate between the cooling liquid and the model and increasing the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the channel. For more information, please visit our website http://fustercnc.com Consult and understand.