大型飛機模型廠家建議，您要想讓自家的飛機模型長久的使用，并無損壞等問題的使用，就要做好一些事項，包含模型的保存以及維護方法，下面廠家為您介紹下吧。
The manufacturer of large aircraft model suggests that if you want to use your own aircraft model for a long time without damage and other problems, you should do a good job, including the preservation and maintenance methods of the model. The manufacturer will introduce it to you below.
一、保存放置
1、 Save Placement
禁懸空放置：放置于兒童不容易接觸到的地方，以免小朋友不小心掉落模型，不但是模型損壞更有可能會傷害到小朋友。
It is forbidden to place it in the air: it should be placed in a place not easily accessible to children to prevent children from accidentally dropping the model. Not only is the model damaged, it is more likely to hurt children.
禁高溫照射：不要長期暴露在陽光或高射燈下直射，容易造成漆面和塑料配件老化、變形、皺裂。
No high temperature exposure: Do not expose to direct sunlight or high light for a long time, which may cause aging, deformation and cracking of paint and plastic accessories.
忌潮濕環境：如果鋅合金模型長期放在較為潮濕的地方，模型表面的合金就會容易氧化，起黑點、漆面起泡等現象，所以盡量保持放置放置環境的干燥。
Avoid wet environment: If the zinc alloy model is placed in a damp place for a long time, the alloy on the surface of the model will be easy to oxidize, black spots, paint blisters, etc., so try to keep the environment dry.
留下包裝盒：這不但影響模型的觀賞度，更重要它會直接影響汽車模型收藏的價值和再次出售的價格。
Leave the packing box: this not only affects the viewing degree of the model, but also directly affects the value of the car model collection and the resale price.
二、鑒賞把玩
2、 Appreciate and play
切勿用力過猛：高仿真模型都是許多零件組裝的，有些零件特別細小，所以一定做到防摔、防震、防壓，動手時候要小心仔細，切勿用力過猛造成零部件損壞。
Do not use too much force: the high simulation model is assembled by many parts, and some parts are very small, so you must be anti falling, shockproof and anti pressure. Be careful when you use your hands, and do not use too much force to damage parts.
三、保養維護
3、 Maintenance
清理灰塵：定期使用用軟毛刷撣灰、吹風機等工具對模型表面的灰塵進行擦拭。
Dust cleaning: regularly use soft brush, hair dryer and other tools to wipe the dust on the surface of the model.
漆面打蠟：合金模型一般放置二到三個月后就需要使用蠟或碧麗珠擦洗表面防銹。但需要注意的是每次打蠟要薄、勻、少。蠟多了就容易嵌進模型的縫隙里。
Paint waxing: After the alloy model is generally placed for two to three months, it is necessary to use wax or Brilliant beads to scrub the surface for rust prevention. However, it should be noted that each waxing should be thin, even and less. Too much wax is easily embedded in the gaps of the model.
If you want to use the aircraft model for a long time, you need to do something well. That's all. If you have any questions that you need to answer, please come to our website http://fustercnc.com Consult!
